I read through several articles for server 2008 and 2008r2 and they all seemed to have bits of the configuration needed for the SBS 2011 server to authenticate but not all of the settings. I have managed to get both mac and windows clients authenticated using the method below: Install Network Policy server by going.
This setup was done using a Telstra Aircard 880U USB modem Enable the WWAN interface SSH to the cyberoam and run 4. Console then type the command cybgeroam wwan enable Reboot the cyberoam and under the network tab you will now see Wireless WAN See http://kb.cyberoam.com/default.asp?id=1797 for information on enabling the Wireless WAN port.
I recently installed the meta-trader package for trading foreign exchange, but was finding I could not get any connection. Suspecting the cyberoam was the culprit I bypassed it and confirmed that when connected directly to an ADSL modem I could connect. Using the packet filter on the cyberoam I could see packets are being consumed.
Unfortunately the reset switch on the cyberoam does not work as you would expect it to, i.e. it does not reset the router to factory defaults. Maybe it should be labelled “Do nothing” instead of reset. In order to reset connect the router by serial cable to a computer. You will need to have a.
If you receive this error, add the users to the group Windows SBS Virtual Private Network Users Other VPN troubleshooting http://blogs.technet.com/b/rrasblog/archive/2009/08/12/troubleshooting-common-vpn-related-errors.aspx
After searching and trying a number of packet sniffers to determine the source of heavy traffic usage, I found this the easiest to install and use by a long way. Its reporting is excellent and it makes it easy to see the source ip generating a lot of traffic. http://www.colasoft.com/capsa/capsa-free-edition.php
C r e a t e d o n V e r s i o n 1 0 . 0 1 . 0 2 8 6 This document outlines the steps to: Enable PPTP Set Encryption and Authentication Settings Grant Users Logon access via PPTP This document assumes: You are using the User Database Local.
This document outlines the steps to: Enabling WWAN Configuring WWAN Setting Gateway to Active/Backup Settings/Diagnostics
If you are running multiple pppoe connections on a Cyberoam there is a but that means if you try to change the gateway weight you get the message Gateway IP & Interface IP Address must be in same network This is due to be fixed in subsequent releases. The fix for now is Open interface..